In the production of silicone products, many people will confuse the color matching of the color box, which is the same. In fact, the color matching of the color box is two concepts. The coloring refers to the color closest to the target color based on the original color. The color matching refers to the color master composition according to the target color, and is adjusted according to the ratio of the color master to reach the closest target color. After the dispensing, the recipe is recorded for the next use.
The coloring operation of silicone rubber products is carried out based on the color matching operation, which is to adjust the original formula to achieve the desired goal. The method is basically the same, but the color matching needs to formulate the formula from the beginning and adjust the color, and the coloring is in the original On the basis of the formula, the color masterbatch and the component are added and subtracted to be closest to the target color and the recipe is recorded.
The color matching method of rubber products and silicone products is the same. First, the color master analysis is performed according to the target color. Which color is composed? According to this choice of color masterbatch, what is the weight of each color masterbatch? According to the analyzed results, the preliminary color formula is written, and the first color matching is performed according to the formula. After the first color matching is completed, the color needs to be matched with the target color, and the color difference between the actual color and the target color, such as the actual color and the target color, is analyzed. If the color difference is too large, it is necessary to continue to adjust according to the color difference direction and refer to the color master matching relationship of the above table, and record the color master and component added each time, until the actual color is very close to the target color, and the color matching formula is summarized. record on file.